Dp715/Dp710 User Manual; Table 12:Status Page - Grandstream Networks DP715 User Manual

Dect cordless ipphone

Hide thumbs Also See for DP715:

User manual (53 pages)

Quick start manual (34 pages)

Configuration manual (6 pages)

Table Of Contents

Table of Contents

In addition to the Basic Settings configuration page, end users also have access to the Device Status page.

MAC Address

The device ID, in HEX format. This is very important ID for ISP troubleshooting. The Mac

address will appear in this place. The MAC address will be used for provisioning and can

be found on the label coming with original box and on the label located on the bottom

panel of the device.

RFPI Address

Radio Fixed Part Identity; indicate the unique identification number of the DP715 base

station.

IP Address

This field shows the IP address of the DP715.

Product Model

This field contains the product model info ("DP715").

Hardware Version

This field shows the hardware revision of the unit and the part number.

Software Version

Program: This is the main software release. This number is always used for firmware

upgrade. Current release is 1.0.0.1 Boot and Loader are seldom changed.

Bootloader:current version is 1.0.0.1.

Core: current version 1.0.0.0

Base: current version is 1.0.0.0

Software Status

Running

System Up Time

Shows system up time since the last reboot.

PPPoE Link Status

Indicates whether the PPPoE connection is up if the DP715 is connected to DSL modem.

NAT

This filed indicates the type of NAT connection used by the DP715.

Base Status

Displays relevant information regarding the Handset subscription status.

• Handset 1 is subscribed with the DP715 base station.

• IPUI ("International Portable User Identity "): is the identifier of each Handset registered

• TPUI ("Temporary Portable User Identity"): Allocated to the Handset automatically by

Handset Status

Displays relevant information regarding the Handset status.

• Handset 1 is registered with SIP Server.

• Handset 1 user has set Do Not Disturb.

• Handset 1 user has set his calls to be unconditionally forwarded to ext 613.

• Handset 1 user has not set Busy or Delay call Forward.

Firmware version 1.0.0.31

Table 12:STATUS PAGE

Mem: 3980, indicate if the software is running and display the memory usage.

Handset

Handset 1

to the base.

the DP715 base.

Handset

Hook

Handset 1

On Hook