Completing Calls; Answering Calls - Grandstream Networks DP715 User Manual

If you want to register ahandset to a new base, it has to be first de-registered from the existing base
by selecting "desubscribe handset " option under the Handsets tab on the web GUI and then repeat
the above steps.

COMPLETING CALLS

There are three ways to complete a call:
A. Dial
1. Press .
3. Dial the number you want once you hear the dial tone.
4. The number appears on the display wait for 4 seconds (Default "No Key Entry Timeout"); or press # to
dial the number directly (Use # as dial key" must be configured in web configuration).
5. To finish the call, press
B. Redial
1. Press .
2. The number you have most recently called appears in first place in the display.
3. Use or
4. Press .
5. The number appearson the display wait for 4 seconds (Default "No Key Entry Timeout"); or press # to
dial the number directly (Use # as dial key" must be configured in web configuration).
6. To finish the call, press
C.Using the Phonebook
1. Press .
2. The first number in the phonebook appears on the display.
3. Press or
4. Press .
5. The number appearson the display wait for 4 seconds (Default "No Key Entry Timeout"); or press # to
dial the number directly (Use # as dial key" must be configured in web configuration).
6. To finish the call, press

ANSWERING CALLS

The handset starts ringing during an incoming call; you have the following options to answer:
a. Press
Firmware version 1.0.0.31
or place the handset in the base unit or the charger unit.
to search for the number you need.
or replace the handset in the base unit or the charger unit.
to browse the phonebook.
or replace the handset in the base unit or the handset charger unit.
to pick up the call.
DP715/DP710 User Manual Page 31 of 56