Basic Operations; Understanding Dp715/710 Voice Prompt; Table 9: Dp715/710 Ivr Menu Definitions - Grandstream Networks DP715 User Manual

UNDERSTANDING DP715/710 VOICE PROMPT

DP715 Base Station has a built-in voice prompt menu for simple device configuration. The IVR menu work
with any Handset registered to the base. Pick up the handset and dial "***" to use the IVR menu.
Menu Voice Prompt
Main Menu
"Enter a Menu Option"
01
"DHCP Mode",
"Static IP Mode"
02
"IP Address " + IP address
03
"Subnet " + IP address
04 "Gateway " + IP address
05 "DNS Server " + IP address
07
Preferred Vocoder
10 "MAC Address"
13
Firmware Server IP
Address
14
Configuration Server IP
Address
15
Upgrade Protocol
16 Firmware Version
17
Firmware Upgrade
47 "Direct IP Calling"
86
Voice Mail
99 "RESET"
"Invalid Entry"
Firmware version 1.0.0.31

BASIC OPERATIONS

Table 9: DP715/710 IVR MENU DEFINITIONS

Options
Press "*" for the next menu option
Press "#" to return to the main menu
Enter 01-05, 07,10, 13-17,47 or 99 menu options
Press "9" to toggle the selection
If using "Static IP Mode", configure the IP address information using
menus 02 to 05.
If using "Dynamic IP Mode", all IP address information comes from
the DHCP server automatically after reboot.
The current WAN IP address is announced
If using "Static IP Mode", enter 12 digit new IP address. You need to
reboot the DP715 for the new IP address to take Effect.
Same as menu 02
Same as menu 02
Same as menu 02
Press "9" to move to the next selection in the list:
•
PCM U / PCM A
•
iLBC
•
G-726
•
G-723
•
G-729
Announces the Mac address of the unit.
Announces current Firmware Server IP address. Enter 12 digit new
IP address.
Announces current Config Server Path IP address. Enter 12 digit
new IP address.
Upgrade protocol for firmware and configuration update. Press "9" to
toggle between TFTP / HTTP / HTTPS
Firmware version information.
Firmware upgrade mode. Press "9" to toggle among the following
three options:
- always check
- check when pre/suffix changes
- never upgrade
Enter the target IP address to make a direct IP call, after dial tone.
(See "Make a Direct IP Call".)
Number of Voice Mails
Press "9" to reboot the device
Enter MAC address to restore factory default setting
(See Restore Factory Default Setting section)
Automatically returns to main menu
DP715/DP710 User Manual Page 29 of 56