Basic Operations; Handset Settings - Grandstream Networks DP720 Quick Installation Manual

BASIC OPERATIONS

TURN THE HANDSET ON / OFF
• To turn ON the handset
Long press on Power key
LCD screen lights up.
• To turn OFF the handset
Long press on Power key
when the handset is idle until the
display turns off.
REGISTER THE DP720 TO DP750
1) On DP750 Base station, press and
hold the Radio/Page button for 7
seconds until the radio icon starts
blinking to start the subscription
process. Or Access web UI and press
Subscribe button
Subscription.
2) On DP720, press Subscribe softkey
if available on the main screen or
access Menu > Settings >
Registration > Register while the
DP750 Radio icon is blinking.
Note: "Subscribe" softkey appears only
if DP720 is not registered to any
DP750 base station.
3) Select BaseX (X=1-4)
corresponding to the desired base
station DP750, then press Subscribe.
4) The DP720 will search for nearby
base stations and will display the RFPI
code and base station name of the
discovered DP750.
5) Press Subscribe to pair with the
displayed DP750.
6) The DP720 will display Easy Pairing
on the LCD and play an audible buzz
when successful. Then it will return to
the home screen, displaying the
handset name and number assigned
by the registered base station.
until the
again
to Open
CHECK BASE STATION IP
ADDRESS
1) Press Menu (left softkey
selection key
operation menu.
2) Press Arrow (Up, Down, Left, Right)
keys to move the cursor to Status icon
, then press "Select" (left softkey)
or OK button.
3) Using Arrow keys, navigate down to
view the IP address of the DP750.

HANDSET SETTINGS

SET THE KEYPAD LOCK
• To enable the Keypad Lock
1) Press the Pound key "#"
hold for approximately 2 seconds.
2) The display shows Keypad Locked
briefly and the key lock icon
appears in the display.
• To disable the Keypad Lock
1) Press and hold Pound key "#"
to unlock the keys.
2) "Keypad Unlocked" appears briefly
in the display and a window prompt
will be displayed to confirm that the
keypad is unlocked.
EDIT THE HANDSET'S NAME
1) Press Menu (left softkey
selection key
operation menu.
2) Use arrow keys to reach Settings
3) Navigate to select Handset Name, and
then press "Select" (left softkey
4) Enter the desired name and press
"Rename" (left softkey
the DP720 will display a confirmation
message that the rename operation was
successful.
or the
) to bring up
or the
) to bring up
) and then
and
.
).
5