Brake Knob And Drag Control Knob Adjustment - Vinten Vision 8 Operator's Manual

(7)
(4)
Position the battery in the battery compartment, ensuring that the wiring is neatly stowed in
the cut-out provided.
Refit the battery cover (14).
Press the switch (4) and ensure that the level bubble (13) is lit for approximately 15 sec-
onds.

Brake knob and drag control knob adjustment

The pan and tilt brake and drag controls may require adjustment after prolonged use. These ad-
justments should be carried out by competent persons as detailed in the Maintenance Manual.
The Maintenance Manual may be obtained from Vinten Broadcast Limited or your local Vinten dis-
tributor or from our website at www.vinten.com.
Battery replacement
(14)
(14.1)
(14.2)
(13)
16