Forced Operation - Electra Monoblock 7 Service Manual

CONTROL SYSTEM
10.11

Forced Operation

Forced operation allows units to start, stop and operate in Cooling or Heating in pre-set
temperature according to the following table:
Forced operation
mode
Cooling
Heating
Note:
• While under the forced operation, the temperature compensation
schedule.
• The forced operation is activated when the mode button on the
Display Board is used to switch the unit to Cool or Heat mode.
• The IFAN is always set to Autofan Speed in forced operation.
10-26
Pre-set Temp for ;
MBX, P2000, PRX,
PX, PXD models
20°C
25°C
Revision Y05-01
CONTENTS
Pre-set Temp for :
FCD, RWK, ELD, ECC,
WAX, WMF, WMN, WNG
models
22°C
28°C
Service Manual - MOBILE Series