Garage Door Opener - Lincoln 1996 Continental Owner's Manual

Garage Door Opener

If you own a garage door opener, the overhead
console of your Continental contains a bin to house
your hand held garage door transmitter. This
feature allows you to activate your garage door
opener with a push of the GARAGE button once
your transmitter has been installed inside the
compartment.
adjusters Velcro strips
The garage door opener bin
To install your garage door transmitter, open
the compartment by pressing the unmarked
button near the GARAGE button. The
compartment door will swing down.
Inside the compartment is a Velcro strip.
Remove the backing from the strip and press the
back side of your garage door transmitter to it.
Be sure to situate the transmitter so that one of
the five "pins" on the compartment door is in a
position to make contact with the garage door
transmitter's activation button after the
compartment door is closed.
NOTE: There are three black "height
adjusters" that can be removed and stacked on
top of each other if the pin is not tall enough by
itself to make contact with the garage door
transmitter's activation button. These extenders
may be placed on any of the five pins.
Height
129