Key Lock - Sigma PC 26.14 Manual

Configuration
2
As shown in the navigation overview (section 1.3), to
access the menu item "Set" press the enter button
and then scroll to "Setting" by pressing the toGGLe/+
button. Finally, press the enter button again.
2.1 Device
Select "device" from the settings menu to configure
basic settings for the device, such as the language,
date and time, tones, or contrast etc.
As described in the previous sections, use the
toGGLe/+ and toGGLe/- buttons to select the
values and the enter button to confirm your settings.
If you want to go back a level, press the StoP button.
After each setting is made, the text "Setting oK"
appears on the display.
8
2.2 Alarm tones
If the upper target zone limit is breached, the device beeps three times every
20 seconds (for as long as you are training outside the zone).
If the lower limit is breached, a longer beep is emitted.

2.3 Key lock

to prevent training sessions from being started by
accident, the buttons can be locked. to do this,
go to the "device" menu and navigate to "Key Lock".
to deactivate the lock press any button followed by
the enter button.
2.4 User
on opening the "Setting" submenu, the user settings
appear.
to access a further submenu within the user settings,
press the enter button.
If, for example, you want to change the "Gender" from
male to female, press enter.
"Male" flashes as the current selection and can be
changed to "Female" by pressing the toGGLe/+
button. Confirm your setting by pressing enter.
9