2.2 Alarm tones
2.3 Key lock
2.4 User
if the upper target zone limit is breached, the device
beeps three times every 20 seconds (for as long as
you are training outside the zone).
if the lower limit is breached, a longer beep is emitted.
To prevent training sessions from being started by
accident, the buttons can be locked. To do this, select
the "Device" menu and navigate to "lock".
To deactivate the lock press any button followed by
EnTER.
The user settings can be found under "user" in the
"set" submenu.
To access a further submenu within the user settings,
press EnTER.
if, for example, you want to change the "gender" from
male to female, press EnTER.
"Male" flashes as the current selection and can be
changed to "Female" by pressing the TogglE/+
button. confirm your setting by pressing EnTER.
11
Need help?
Do you have a question about the RC Move and is the answer not in the manual?