Custom Names Menu; Custom Bin Names Menu; Universal Setup Menu - Lexmark C790 Series User Manual

Custom Names menu

Menu item
Custom Name [x]
[none]

Custom Bin Names menu

Menu Item
Standard Bin
Bin [x]

Universal Setup menu

These menu items are used to specify the height and width of the Universal paper size. The Universal paper size is a
user-defined paper size setting. It is listed with the other paper size settings and includes similar options, such as
support for duplex printing and printing multiple pages on one sheet.
Menu item
Units of Measure
Inches
Millimeters
Portrait Width
3–48 inches
76–1219 mm
Portrait Height
3–48 inches
76–1219 mm
Feed Direction
Short Edge
Long Edge
Definition
Specify a custom name for a paper type. This name replaces the Custom
Type [x] name in the printer menus.
Description
Specifies a custom name for the Standard Bin
Specifies a custom name for Bin [x]
Description
Identifies the unit of measure
Note: Inches is the US factory default setting. Millimeters is the
international factory default setting.
Sets the portrait width
Notes:
•
If the width exceeds the maximum, then the printer uses the
maximum width allowed.
•
8.5 inches is the US factory default setting. 216 mm is the
international factory default setting.
•
The width can be increased in 0.01-inch or in 1-mm increments.
Sets the portrait height
Notes:
•
If the height exceeds the maximum, then the printer uses the
maximum height allowed.
•
14 inches is the US factory default setting. 356 mm is the international
factory default setting.
•
The height can be increased in 0.01-inch or in 1-mm increments.
Specifies the feed direction
Notes:
•
Short Edge is the factory default setting.
•
Long Edge appears only if the longest edge is shorter than the
maximum width supported in the tray.
Understanding printer menus
101