Lexmark C790 Series User Manual page 45

6
Select your printer from the list, and then click Continue.
Note: If your configured printer does not appear in the list, then click Modify Search.
7
Follow the instructions on the computer screen.
For Macintosh users
1
Allow the network DHCP server to assign an IP address to the printer.
2
Obtain the printer IP address.
a
From the printer, print a network setup page.
For more information, see "Printing a network setup page" on page 38.
b
In the TCP/IP section, look for IP Address.
Note: You will need the IP address if you are configuring access for computers on a different subnet than
the printer.
3
Install the drivers, and then add the printer.
a
Install a PPD file on the computer:
1
Insert the Software and Documentation CD, and then double-click the installer package for the printer.
2
Follow the instructions on the computer screen.
3
Select a Destination, and then click Continue.
4
From the Easy Install screen, click Install.
5
Type the user password, and then click OK.
All the necessary software is installed on the computer.
6
Click Close when installation is complete.
b
Add the printer:
•
For IP printing:
In Mac OS X version 10.5 or later
1
From the Apple menu, navigate to:
System Preferences > Print & Fax
2
Click +, and then click the IP tab.
3
Type the IP address of your printer in the Address field, and then click Add.
In Mac OS X version 10.4 or earlier
1
From the Finder, navigate to:
Applications > Utilities
2
Double-click Printer Setup Utility or Print Center.
3
From the Printer List, click Add, and then click IP Printer.
4
Type in the IP address of your printer in the Address field, and then click Add.
•
For AppleTalk printing:
Note: Make sure AppleTalk is activated on your printer.
Additional printer setup
45