Menu item
Paper Saver
Off
2-Up
3-Up
4-Up
6-Up
9-Up
12-Up
16-Up
Paper Saver Border
None
Solid
Paper Saver Ordering
Horizontal
Reverse Horizontal
Reverse Vertical
Vertical
Separator Sheets
None
Between Copies
Between Jobs
Between Pages
Separator Sheet Source
Tray [x]
Manual Feeder
Blank Pages
Do Not Print
Print
Description
Specifies that multiple-page images be printed on one side of a paper
Notes:
•
Off is the factory default setting.
•
The number selected is the number of page images that will print per side.
Prints a border around each page image when using Paper Saver
Note: None is the factory default setting.
Specifies the positioning of multiple-page images when using Paper Saver
Notes:
•
Horizontal is the factory default setting.
•
Positioning depends on the number of page images and whether they are in
portrait or landscape orientation.
Specifies whether blank separator sheets are inserted
Notes:
•
None is the factory default setting.
•
Between Copies inserts a blank sheet between each copy of a print job if
Collation is set to On. If Collation is set to Off, then a blank page is inserted
between each set of printed pages, such as after all page 1's and after all page
2's.
•
Between Jobs inserts a blank sheet between print jobs.
•
Between Pages inserts a blank sheet between each page of the print job. This
setting is useful when printing transparencies or inserting blank pages in a
document for notes.
Specifies the paper source for separator sheets
Notes:
•
Tray 1 (standard tray) is the factory default setting.
•
From the Paper menu, Configure MP must be set to Cassette in order for Manual
Feeder to appear as a menu setting.
Specifies whether blank pages are inserted in a print job
Note: Do Not Print is the factory default setting.
Understanding printer menus
133