Table of Contents
Advertisement
CAUTION: LABEL ALL WIRES PRIOR TO DISCONNECTION WHEN SERVICING CONTROLS.
WIRING ERRORS CAN CAUSE IMPROPER AND DANGEROUS OPERATION.
VERIFY PROPER OPERATION AFTER SERVICING.
Step 8. Finishing
The following diagram shows the minimum vertical and corresponding maximum horizontal
dimensions of fireplace mantels or other combustible projections above the top front edge of the
fireplace. Only non-combustible materials may be used to cover the black fireplace front.
CAUTION: IF JOINTS BETWEEN THE FINISHED WALLS AND THE FIREPLACE SURROUND
℃ ℃ ℃ ℃
(TOP AND SIDES) ARE SEALED, A 149
. MINIMUM SEALANT MATERIAL MUST BE USED.
THESE JOINTS ARE NOT REQUIRED TO BE SEALED. ONLY NON-COMBUSTIBLE
℃ ℃ ℃ ℃
MATERIAL (USING 149
. MINIMUM ADHESIVE, IF NEEDED) CAN BE APPLIED AS FACING
TO THE FIREPLACE SURROUND. SEE THE DIAGRAM BELOW.
23
Advertisement
Table of Contents
