Table of Contents
Advertisement
S.I.T. VALVE DESCRIPTION
Step 7. Gas Pressure Requirements
Pressure requirements for legend gas fireplaces are shown in the table below.
Pressure
Inlet Gas Pressure
Manifold Pressure
Caution: Ensure that the wires do not touch any hot surfaces and are away from sharp edges.
NOTE: Even if the fan is not purchased with the unit, it is still a good idea to bring power to
the receptacle box (not provided with the unit) in case the fan is installed at a later date.
The appliance is fitted with a power cord and 3 pin plug. Install the appliance so that the plug is
easily accessible. Plug the 3-pin plug into a properly earthed, 15A general purpose power outlet.
The supply cable should be positioned so that it does not reach a temperature of more than 75
degrees Celsius along its entire length.
If the supply cord or plug is damaged, it must be replaced by the manufacturer or its service agent or
a similarly qualified person in order to avoid hazard.
Natural Gas
1.13kPa
0.87kPa
22
Advertisement
Table of Contents
