Installing Your Phone - Broadview OfficeSuite User Manual

Installing Your Phone Without
Power Over Ethernet
1a: ConneCt Your phone to the loCal
area netWork
Connect one of the provided Ethernet cables into
your existing local area network (LAN) and into the
port on the power adapter. Next, connect another
Ethernet cable into the
adapter and into the
your OfficeSuite® phone.
Proceed to
(optional)
For a list of recommended headsets, go to
{or}
port on your power
port on the back of
Step 2
www.broadviewnet.com/ready
Installing Your Phone With Power
Over Ethernet
1b: ConneCt Your phone to the loCal
area netWork
If your network is Power over Ethernet enabled, you
do not need the power adapter and should simply
connect an Ethernet cable into your existing local
area network and into the
of your OfficeSuite® phone.
2: ConneCt Your phone handSet
Connect your phone handset into the port next to
on the back of your OfficeSuite® phone. You may also
connect a headset into the port next to
back of your OfficeSuite® phone.
3: ConneCt Your pC to Your phone
(optional)
OfficeSuite® can utilize an integrated Ethernet switch
that allows you to connect to your computer without
requiring an Ethernet Port.
To do this, connect one of the provided Ethernet
cables to your computer and into the PC port
on the back of your OfficeSuite® phone.
For helpful videos, guides and other tools, visit:
http://www.broadviewnet.com/getting-started
port on the back
on the
9