Sync Lock Setting; Recommended Lighting Conditions; Using The Visca Rs-422 Connector Plug - Sony BRC-H700 Manual

12.4 Sync Lock Setting

In.order.to.match.output.signal.timing.to.the.input.
signal,.the.Sync.Master.setting.is.required.on.the.
Main.menu..To.achieve.this,.select.Menu,.System,.
and.then.Sync.Master..
BRC-H700
Output.signal.to.be.matched.with.input.signal
....When.using.HFBK-HD1.
....When.using.HFBK-SD1.
....Output.from.main.unit.BRC-H700.

12.5 Recommended Lighting Conditions

The.BRC-H700:.brighter.than.400.lx
The.BRC-Z700:.brighter.than.450.lx
The.BRC-00/00P:.brighter.than.600.lx

12.6 Using the VISCA RS-422 Connector Plug

1
Insert.a.wire.(AWG.Nos..8.to.18).into.the.desired.
wire.opening.on.the.VISCA.RS-4.connector.
plug,.and.tighten.the.screw.for.that.wire.using.a.
flathead.screwdriver.
2
Insert.the.VISCA.RS-4.connector.plug.into.the.
VISCA.RS-4.connector.
48
Techinical Appendix
BRC-Z700
....When.HD.output.signal.from.BRC-Z700.main.unit.
.
....When.SD.output.signal.from.BRC-Z700.main.unit.
.
....When.connecting.with.BRU-H700
[.HD1.] ....Output.signal.from.BRU-H700..
[.SD1.] ....When.using.HFBK-HD1.with.BRU-H700.[.HD1.]
[.STD.] ....When.using.HFBK-SD1.with.BRU-H700. [SD1]
To remove the connector plug
Grasp.both.ends.of.the.VISCA.RS-4.connector.
plug.and.pull.it.out.as.shown.in.the.illustration.
•.In.order.to.stabilize.the.voltage.level.of.the.signal,.
Note
•.When.you.make.connections.using.VISCA.RS-4.
•.The.maximum.connection.distance.with.VISCA.......
connect.both.ends.to.GND..
connectors,.the.VISCA.RS-C.connection.is.not.
available.
RS-4.connection.is.approximately.1,00.m......
(,97.ft).
[STD.[HD]]
[STD.[SD]].
[STD.[HD]]