Service Aid; Special Tools - ESAB Arc 4000i Service Manual

Service aid

We can offer a number of service tools that will simplify the service.
Antistatic service kit
Ordering no. 0740 511 001
The kit makes it easier to protect sensitve
components from electrostatic discharge.
Contents:
A conductive mat (size 610 x 610 mm)
S
A 1.5 metre long ground cable with a
S
crocodile clip
An adjustable wrist strap and cable with
S
an inbuilt protective resistor
ESAT service kit
Ordering no. 0458 847 880
The software update is made from a PC, it has to be managed by a trained serviceman. For
this a computer program called ESAT, ESAB software administration tool, is needed. The
PC is connected to the welding equipment by a cable connector and a CAN reader. From
the ESAT it is possible to update the software in power source, wire feeder and control
panel. ESAT contains also service functions by which it is possible to control, change or
read the different functions in the equipment.
For the installation and use of ESAT program you need a computer with operating system
Windows 9x, NT4, 2000 or XP.
The ESAT service kit contents:
CAN adapter PPCAN
S
Connection Cable between CAN reader and power source
S
CAN adapter software and ESAT software on CD
S
Instruction manual for ESAT
S

Special tools

Soft- -starting tool SST 2
The SST 2 is originally made for the
cable so that it also can be used for the 4000i and 5000i machine series.
The ordering number for the SST 2, including adapter cable for the 4000i and 5000i
machine series, is: 0460 040 880.
If you have an SST 2 without adapter cable for the 4000i and 5000i machine series, the
ordering number for the adapter cable is: 0460 042 881.
cp03f2
Antistatic service kit
3000i machine series. It
- - 56 - -
is now delivered with an adapter
S0740 800 191/E080229/P78