Sony HCD-FL5D Service Manual page 29

Dvd deck receiver
Table of Contents

Advertisement

2. DRIVE MANUAL OPERATION
Note: This mode is used for design, and not used in service fundamen-
tally.
[2]
On the Test Mode Menu screen, press the
key on the remote
commander, and the Operation Menu will be displayed. For the
manual operation, each servo on/off control and adjustment can
be executed manually.
## Drive Manual Operation ##
Operation Menu
1. Disc Type
2. Servo Control
3. Track/Layer Jump
4. Non EEPROM Write Adjust
5. EEPROM Write Adjust
6. Memory Check
7. Disc Check Memory
8. Error Rate Display
9. SACD Water Mark
Exit: RETURN
In using the manual operation menu, take care of the following
points. These commands do not provide protection, thus requiring
correct operation. The sector address or time code field is dis-
played when a disc is loaded.
Note:
1. Set correctly the disc type to be used on the Disc Type screen.
2. In case of an alarm, exit the manual operation menu immedi-
ately to stop the servo operation, and press the
/
1
button to
I
turn the power off.
Basic operation:
(controllable from front panel or remote commander)
[POWER]
: Power OFF (release the Test Mode)
Z
: Stop and eject/Loading
[RETURN]
: Return to Operation Menu or Test
Mode Menu
[PREV
]
[NEXT
]
.
>
,
: Transition between sub modes of
menu
[1] to [9], [10/0]
: Selection of menu items
Cursor o / O
: Increase/Decrease in manually ad-
justed value
HCD-FL5D
2-1. Disc Type
Disc Type
Disc Type Select
1. Disc Type Auto Check
2. Set Disc Type DVD
3. Set Disc Type CD
4. Set Disc Type Hybrid
Exit: RETURN
2-1-1. Disc Type Auto Check
[1]
1)
Press the
key on the remote commander to display the Disc
Type Auto Check screen.
[ENTER]
2)
Insert a disc and press the
key on the remote
commander.
3)
It judges the type of inserted disc automatically and displays
the disc type and so on as below.
Disc Type Auto Check
Disc Type xx
Layer
xx
Mirr Time xx
Mirr Count
xx
FZC Count xx
PI Reference
xx
PI Peak
xx
ENTER.Execute
Exit: RETURN
Disc Type
: CD, DVD or Hybrid (SACD)
Layer
: SINGLE, DUAL or HYBRID
Mirr Time
: Mirror time of between disc surface and record sur-
face when disc type judgment. (hexadecimal num-
ber)
Mirr Count : The number of times which mirror counts between
disc surface and record surface when disc type judg-
ing.
FZC Count : The number of times which focus zero cross points
of each layer when lens down.
PI Reference: The average of PI reference voltage. (hexadecimal
number)
PI Peak
: PI peak level voltage. It performs only when disc
type judgment is successful. (hexadecimal number)
2-1-2. Disc Type DVD
It sets up so that it may judge as a disc type of specification of the
disc with which the set was inserted.
[1]
: DVD single layer disc (12 cm)
[2]
: DVD dual layer disc (0 layer, 12 cm)
[3]
: DVD dual layer disc (1 layer, 12 cm)
[4]
: DVD-RW disc (12 cm)
[5]
: DVD single layer disc (8 cm)
[6]
: DVD dual layer disc (0 layer, 8 cm)
[7]
: DVD dual layer disc (1 layer, 8 cm)
[8]
: DVD-RW disc (8 cm)
Page 29

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents