Sony HCD-FL5D Service Manual page 26

HCD-FL5D
4. Tape Recording Test
Procedure:
1. Enter the MC Test Mode.
2. Load tapes in both tape decks A and B.
3. Press the REC button to start recording.
– m M +
4. Pressing the or
the tape to the recording start position and stops it at this posi-
tion.
5. Pressing the "High Speed Dubbing" key while playing back
the tape of deck B switches the playback speed between "Nor-
mal Speed" and "High Speed".
Note:
When the playback direction of the tape is set to other than "ONY WAY",
the restriction on the number of times playback which can be repeated
will be cleared.
5. AMS Test Mode
1. Enter the MC Test Mode and press the
set the TAPE function.
2. Insert a test tape AMS-110A or AMS-120 to deck A.
[KARAOKE PON]
3. Press the
enter the AMS test mode.
4. After a tape is rewound first, the FF AMS is checked, and the
mechanism is shut off after detecting the AMS signal the AMS
signal twice.
5. Then the REW AMS is checked and the mechanism is shut off
after detecting the AMS signal twice.
6. When the check is complete, a message of either OK or NG
appears.
[DVD SHIP MODE (MEMORY CLEAR) ]
• This mode moves the optical pick-up to the position durable to
vibration. Use this mode when returning the set to the customer
after repair.
Procedure:
[I/ ]
1. Press the 1 button to turn the power on.
2. Press three buttons x
simultaneously.
3. After the "STANDBY" display blinks, a message "LOCK" is
displayed on the fluorescent indicator tube, and the CD ship
mode is set.
[DVD SHIP MODE (NO MEMORY CLEAR) ]
• This mode moves the optical pick-up to the position durable to
vibration. Use this mode when returning the set to the customer
after repair.
Procedure:
[I/ ]
1. Press the button to turn the power on.
1
[DVD] [I/ ]
2. Press the and 1
3. After the "STANDBY" display blinks, a message "LOCK" is
displayed on the fluorescent indicator tube, and the CD ship
mode is set.
[VACS ON/OFF MODE]
• This mode is used to switch on or off the VACS (Variable At-
tenuation Control System).
Procedure:
1. Press two buttons of >
simultaneously.
2. When VACS is switch on, it displays "VACS OFF".
When VACS is switch off, it displays "VACS O".
26
buttons during recording returns
[TAPE A/B]
button to
key on the remote controller to
[CD SYNC HI-DUB] [DVD]
, and
buttons simultaneously.
[B ]
Z
and for more than 1 second
[CD REPEAT 5 LIMIT OFF MODE]
Number of repeat for CD playback is 5 times when the repeat
mode is "REPEAT". This mode enables CD to repeat playback for
limitless times.
Procedure:
[I/ ]
1. Press the 1 button to turn the power on, and press the
button to select the function "DVD".
2. Press two buttons of >
than 1 second simultaneously to enter the CD repeat 5 limit off
mode.
3. To release this mode, operate the cold reset. (Refer to the "MC
COLD RESET")
[DISC TRAY LOCK]
Procedure:
[I/ ]
1
1. Press the button to turn the power on.
[DVD]
2. Press the button to select the function "DVD".
3. Press two buttons of Z (DVD) and
taneously for five seconds.
4. The message "LOCKED" is displayed and the tray is locked.
(Even if exiting from this mode, the tray is still locked)
5. To exit from this mode, press two buttons of
[DVD TOP MENU]
simultaneously for five seconds again.
6. The message "UNLOCKED" is displayed and the tray is un-
locked.
[DVD]
[CD SYNC HI-DUB]
and for more
[DVD TOP MENU]
simul-
Z
(DVD) and