FRONT FORK COMPRESSION DAMPING FORCE ADJUSTMENT
FRONT FORK COMPRESSION
DAMPING FORCE ADJUSTMENT
The compression adjuster is located at the bottom
of the fork leg.
1. Adjust:
• Compression damping force
By turning the adjuster.
¡
Stiffer
Increase the compression damp-
ing force. (Turn the adjuster
in.)
¡
Softer
Decrease the compression damp-
ing force. (Turn the adjuster
out.)
Extent of adjustment:
Maximum
Fully turned in
position
• STANDARD POSITION
This is the position which is back by the specif-
ic number of clicks from the fully turned-in posi-
tion.
Standard position:
16 clicks out
CAUTION:
Do not force the adjuster past the minimum
or maximum extent of adjustment. The
adjuster may be damaged.
WARNING
Always adjust each front fork to the same set-
ting. Uneven adjustment can cause poor han-
dling and loss of stability.
22
INSP
ADJ
Minimum
20 clicks out
(from maximum
position)