Assembly; Warning - Vision Fitness R40 Owner's Manual

wARNINg

READ AND SAVE ALL INSTRUCTIONS bEfORE ASSEmbLINg OR USINg THIS
ExERCISE bIkE. IT IS STRONgLy RECOmmENDED TO TAkE THE fOLLOwINg SAfETy
INSTRUCTIONS.
• CaUTIon: If you experience chest pains, nausea, dizziness or shortness of breath, stop exercising immediately and consult your
physician before continuing.
• Use this exercise bike for its intended purpose as described in this manual. do not use attachments that have not been
recommended by the manufacturer.
• never operate the exercise bike if it is not working properly or if it has been damaged. Please reference contact information on the
back cover for assistance.
• do not use the exercise bike without proper footwear. nEVER operate the exercise bike with bare feet.
• do not wear any clothing that might catch on any moving parts of this exercise bike.
• Keep hands and feet clear at all times from moving parts to avoid injury. never turn the pedal cranks by hand.
• do not dismount the exercise bike until the pedals are at a complete sToP.
• do not attempt to ride the exercise bike in a standing position at high RPms until you have practiced at slower speeds.
• do not insert any object, hands or feet into any openings, or expose hands, arms or feet to the drive mechanism or other
potentially moving part of the exercise bike.
• do not use any equipment that is damaged or has worn or broken parts. Use only replacement parts supplied by an authorized
service technician.
• do not operate where aerosol (spray) products are being used or when oxygen is being administered.
• Close supervision is necessary when used near children, invalids or disabled people.
• when the exercise bike is in use, young children and pets should be kept at least 3 meters / 310 cm (10 feet) away.
• Ensure that adjustment levers (seat and handlebar fore-and-aft) are properly secured and do not interfere with range of motion
during exercise.
4

assEmBlY

wARNINg
There are several areas during the assembly process when special attention must be paid. It is very important to follow the
assembly instructions correctly and to make sure all parts are firmly tightened. If the assembly instructions are not followed
correctly, the bike could have frame parts that are not tightened and will seem loose and may cause irritating noises. To prevent
damage to the bike, the assembly instructions must be reviewed and corrective actions should be taken.
Before proceeding, find your bike's serial number located on a white barcode sticker on
the bottom-front of the bike as shown in this image.
EnTER YoUR sERIal nUmBER and modEl namE In THE BoXEs BElow:
sERIal nUmBER:
VISION
modEl namE:
SERIAL NUmbER LOCATION
bIkE
5