Tools Included; Pre-Assembly - Vision Fitness R40 Owner's Manual

TOOLS INCLUDED:

F 15/17 mm Flat wrench
If you have questions or if there
F 4 mm l wrench (U20/R20/R40)
are any missing parts, contact your
F 5 mm T wrench
authorized Vision Fitness retailer.
F screwdriver
all
F 5 mm l wrench
modEls
F 14/17 mm Flat wrench (U20/U40)
U20 & U40 PARTS R20 & R40 PARTS
INCLUDED: INCLUDED:
F 1 Bike Frame F 1 Bike Frame
F 1 Rear stabilizer Tube F 1 Rear stabilizer Tube
F 1 Front stabilizer Tube (U20 only) F 1 seat Bottom
F 1 Console mast F 1 seat Bottom support (R40 only)
F 1 Console mast grommet F 1 mesh seatback
F 1 Pulse grip Handlebar F 1 seat Handlebar
F 1 water Bottle Holder F 1 seat Frame
F 1 seat Post Tube F 1 set Inside/outside seatback
F 1 seat Covers (R20 only)
F 1 seat adjustment Knob F 1 Console mast
F 2 Pedals with straps F 1 Console mast grommet
F 1 Power Cord F 1 Console Handlebar
F 1 Hardware Kit F 1 water Bottle Holder
F 2 Pedals with straps
F 1 Power Cord
F 1 Hardware Kit
10

PRE-assEmBlY

NEED HELP?
UNPACkINg
Unpack the product where you will be using it. Place
the carton on a level flat surface. It is recommended
that you place a protective covering on your floor.
never open box when it is on its side.
noTE: during each assembly step, ensure that all
nuts and bolts are in place and partially threaded in
before completely tightening any onE bolt.
noTE: a light application of grease may aid in the
installation of hardware. any grease, such as lithium
bike grease is recommended.
noTE: It is recommended that two people work
together for ease and efficiency while assembling.
assEmBlY
U20 & U40 PAgE 12 R20 & R40 PAgE 17
11