Tray Use in Copy mode
You can change the priority tray that the
machine will use for printing copies.
When you choose Tray#1 Only, MP Only
1
or Tray#2 Only
, the machine pulls the
paper only from that tray. If the selected tray
is out of paper, No Paper will appear on the
LCD. Insert paper in the empty tray.
To change the tray setting follow the
instructions below:
a
Press Menu.
b
Press a or b to display
General Setup.
Press General Setup.
c
Press a or b to display Tray Setting.
Press Tray Setting.
d
Press a or b to display
Tray Use:Copy.
Press Tray Use:Copy.
e
Press Tray#1 Only, Tray#2 Only
MP Only, MP>T1>T2
f
Press Stop/Exit.
1
The Tray#2 Only and T2 appear only if Tray 2 is
installed.
Note
• When loading documents in the ADF and
MP>T1>T2 or T1>T2>MP is selected, the
machine looks for the tray with the most
suitable paper and pulls paper from that
tray. If no tray has suitable paper, the
machine pulls paper from the higher
priority tray.
• When using the scanner glass, your
document is copied from the higher
priority tray even if more suitable paper is
in another paper tray.
2
1
,
1
1
or T1>T2
>MP.
Tray Use in print mode
You can change the default tray the machine
will use for printing from your computer and
Direct Print.
a
Press Menu.
b
Press a or b to display
General Setup.
Press General Setup.
c
Press a or b to display Tray Setting.
Press Tray Setting.
d
Press a or b to display
Tray Use:Print.
Press Tray Use:Print.
e
Press Tray#1 Only, Tray#2 Only
MP Only, MP>T1>T2
f
Press Stop/Exit.
1
The Tray#2 Only and T2 appear only if Tray 2 is
installed.
Loading paper
2
2
1
,
1
1
or T1>T2
>MP.
19