Paper Settings; Paper Type; Paper Size; Tray Use In Copy Mode - Brother DCP-9055CDN Basic User's Manual

Chapter 2

Paper settings

Paper Type

Set up the machine for the type of paper you
are using. This will give you the best print
quality.
a
Do one of the following:
 To set the paper type for the
MP Tray press Menu, 1, 1, 1, 1.
 To set the paper type for Tray#1
press Menu, 1, 1, 1, 2.
To set the paper type for Tray#2

press Menu, 1, 1, 1, 3 if you installed
the optional tray.
1
Tray#2 appears only if the optional tray is
installed.
b
Press a or b to choose Thin, Plain,
Thick, Thicker, Recycled Paper
or Glossy Paper.
Press OK.
c
Press Stop/Exit.
Note
You can choose Glossy Paper for
MP Tray.

Paper Size

You can use the following sizes of paper for
printing copies: A4, Letter, Legal, Executive,
A5, A5 L, A6, B5, B6, Folio (8.5 in.  13 in.),
16K (195  270mm), 16K (184  260mm) and
16K (197  273mm).
When you change the size of paper in the
tray, you will also need to change the setting
for paper size at the same time so your
machine can fit the document.
a
Do one of the following:
 To set the paper size for the
MP Tray press Menu, 1, 1, 2, 1.
18
 To set the paper size for Tray#1
press Menu, 1, 1, 2, 2.
2
 To set the paper size for Tray#2
press Menu, 1, 1, 2, 3 if you installed
2
the optional tray.
1
Tray#2 appears only if the optional tray is
installed.
b
Press a or b to choose A4, Letter,
Legal, Executive, A5, A5 L, A6, B5,
B6, Folio, 16K(195x270mm),
16K(184x260mm), 16K(197x273mm)
or Any.
Press OK.
1 c
Press Stop/Exit.
Note
• The Any option appears only when you
choose the MP tray.
• If you choose Any for the MP Tray Paper
Size: You must choose MP Only for the
Tray Use setting. You cannot use the Any
Paper Size selection for the MP tray when
making N in 1 copies. You must choose
one of the other available Paper Size
selections for the MP tray.
• A5 L and A6 size are not available for the
Tray#2.
• 16K(195x270mm), 16K(184x260mm)
and 16K(197x273mm) size are not
available for Tray#1 and Tray#2.
2

Tray Use in copy mode

You can change the priority tray that the
machine will use for printing copies.
When you choose Tray#1 Only, MP Only
or Tray#2 Only
paper only from that tray. If the selected tray
is out of paper, No Paper will appear on the
LCD. Insert the paper in the empty tray.
To change the tray setting follow the
instructions below:
a
Press Menu, 1, 4, 1.
1
, the machine pulls the
1
2