Brother DCP-8250DN Basic User's Manual page 81

Error Message
Jam Tray 1
Jam Tray 2
Limit Exceeded
Log Access Error
Manual Feed
No HUB Support
No Paper
No Toner
No Tray
Cause
The paper is jammed in the
paper tray of the machine.
The number of pages you are
allowed to print has been
exceeded. The print job will be
cancelled.
The machine could not access
the print log file in the server.
Manual was selected as the
paper source when there was
no paper in the MP tray.
A USB hub device is
connected to the USB direct
interface.
The machine is out of paper in
the specified tray or all trays, or
paper is not correctly loaded in
the paper tray.
The toner cartridge or the drum
unit and toner cartridge
assembly is not installed
correctly.
The standard paper tray is not
installed or not installed
correctly.
Action
See Paper is jammed in paper tray 1 or tray 2
uu page 80.
Contact your administrator to check your
Secure Function Lock Settings.
Contact your administrator to check the Store
Print Log to Network settings.
For detailed information uu Network User's
Guide: Store Print Log to Network
Place paper in the MP tray. If the machine is in
Pause mode, press Start. (See Loading paper
in the multi-purpose tray (MP tray)
uu page 13.)
Disconnect the USB hub device from the USB
direct interface.
Do one of the following:
 Refill paper in the paper tray shown on the
LCD. Make sure the paper guides are set to
the correct size.
 Remove the paper and load it again. Make
sure the paper guides are set to the correct
size.
Remove the drum unit and toner cartridge
assembly, remove the toner cartridge from the
drum unit, and re-install the toner cartridge
back into the drum unit again. Re-install the
drum unit and toner cartridge assembly back in
the machine. If the problem continues, replace
the toner cartridge.
(See Replacing the toner cartridge
uu page 48.)
Re-install the standard paper tray.
Troubleshooting
B
73