Loading Documents; How To Load Documents; Using The Automatic Document Feeder (Adf) - Brother DCP-8250DN Basic User's Manual

3

Loading documents

How to load
documents
You can copy and scan from the
ADF(automatic document feeder) or the
scanner glass.
Using the automatic
document feeder (ADF)
The ADF can hold up to 50 pages and feeds
each sheet individually. We recommend you
2
use standard 80 g/m
the pages before putting them in the ADF.
Document Sizes Supported
Length: 147.3 to 355.6 mm
Width: 147.3 to 215.9 mm
Weight: 2
64 to 90 g/m

How to load documents

Important
• DO NOT leave thick documents on the
scanner glass. If you do this, the ADF may
jam.
• DO NOT use paper that is curled,
wrinkled, folded, ripped, stapled, paper-
clipped, pasted or taped.
• DO NOT use cardboard, newspaper or
fabric.
• To avoid damaging your machine while
using the ADF, DO NOT pull on the
document while it is feeding.
paper and always fan
Note
• To scan documents that are not suitable
3
for the ADF, see Using the scanner glass
uu page 26.
• It is easier to use the ADF if you are
loading a multiple page document.
• Make sure documents with correction fluid
or written with ink are completely dry.
3
a
Unfold the ADF document support (1).
Lift up and unfold the ADF document
output support flap (2).
3
3
b
Fan the pages well.
c
Stagger the pages of your document
face up top edge first, in the ADF until
the LCD display message changes and
you feel the top page touch the feed
rollers.
3
3
1 2
25