Table of Contents
Advertisement
Now step the mast, following the instructions in Section 3.4 –
Stepping the Mast.
Once the
mast
is stepped in the boat, you can attach the
adjuster
plates. A good setting to start with is with the pins in the third hole down on
the
shroud adjuster
The
mast
on the RS Feva is supported at deck level by the
foredeck. The
shrouds
applied to the
jib
the
shroud adjuster
tension is applied to the
To rig the jib:
1) Unroll the jib.
2) Take the tail of rope sewn into the
loop on the
tack
3) Pass the tail through the webbing loop sewn onto the
plate.
are fitted to stop the
halyard, hence making the
hole position will affect the amount that the
jib
halyard.
bar.
HINT
mast
from bending when tension is
jib
work better. Therefore, changing
tack
of the jib, and pass it through the metal
shrouds
to the
shroud
mast gate
and the
mast
bends when
tack
of the jib.
Hide quick links:
Advertisement
Table of Contents
