To complete this section, you will require:
• The
rudder
• The
rudder stock
• The
Tiller
• The
Tiller
• The Tiller extension
1) Remove the rudder assembly from the foil pack and locate the components- the
self-tapping screw is in a small bag, in with the tiller arm.
2) Slide the
Tiller
Rudder Stock
3) Tie the
rudder downhaul block
4) Attach the
Tiller extension
3.7 The Rudder
retaining screw
into the
stock
and fix it with the self-tapping screw.
Picture 3.14 Rudder Fitted in the Stock
onto the rope from the Rudder blade.
to the Tiller.
Tiller
e xtension
Rope