Table of Contents
Advertisement
other.
2) Slide the inner sleeve of the
section
(see picture 3.5).
3) Push the two
mast
should ensure that the
4) Uncoil the
main halyard
5) Thread one end through the bullseye at the top of the mast (see picture 3.5).
6) Run both ends of the
place (this prevents them from disappearing back up the mast!).
Please note, top and bottom mast sections are matched, they are not
interchangeable so if you have more than one boat you should consider
marking the sections to identify which go together.
mast top section
sections together (see picture 4.6). The angle of the join
mast track
on the two sections aligns.
Picture 3.3 Joining the Mast
Picture 3.4 A joined Mast
main halyard
into the end of the
to the bottom of the mast and tie in
mast lower
Hide quick links:
Advertisement
Table of Contents
