Now the mast is ready to be put up in the boat, or 'stepped'.
If you are rigging the Jib and Gennaker Packs, you need to read Sections 3.9 and
3.10 before stepping the mast
The Mast-Gate Pin
The
mast-gate pin
bottom to prevent it from falling out.
To close the mechanism (see picture 3.6):
1) Push the Pin through the gate
2) Screw down the knurled nut until it is tight.
Picture 3.5 Threading the Main Halyard
REMEMBER
3.4 Stepping the Mast
is already fitted to your Feva. The pin has a locking nut on the