EverFocus EMV401 User Manual page 133

Hybrid mobile dvr 4 / 8 / 16ch, h.264, real time at d1/wd1/1080p
Hide thumbs Also See for EMV401:
Table of Contents

Advertisement

EMV401 / 801 / 1601 Hybrid Mobile DVR
Resolution: Recording resolution is displayed.
Normal: Frame rate in FPS for continuous recording. It is important to keep track of the
normal recording resources being allocated at each hours of the day. Increasing the Normal
recording resolution and/or rate can inadvertently request more recording resources than the
mobile DVR is capable of delivering, or allocate so much of the mobile DVRs resources that
there is no excess available for increased FPS rate and/or resolution in response to an Event.
The speed is limited by the maximum total recording capacity of the mobile DVR as allocated
across TV standard in global setting, all the installed cameras, with an upper limit of 30 FPS
(NTSC – 25 PAL) per individual camera (real time recording). The PARAGON960 x4 can record
480 fps (NTSC) / 400 fps (PAL) at WD1.
Since EverFocus mobile DVRs have the capability to change the FPS rate in response to events,
it may be advisable to reserve some recording capacity for event response.
Event: Maximum desired frame rate in frames per second (FPS) for event recording; if more
than one camera requires simultaneous event recording, the total for all cameras cannot
exceed the maximum available FPS for the mobile DVR at the corresponding resolution
setting, and the available FPS may be divided across the cameras responding to an event.
Action: Check this box to enable notifications enabled elsewhere (Buzzer, Alarm out, E-mail,
and Network Alarm) when an event occurs.
Apply to Days: This button can be used to copy schedules to other days. Select which days
you wish to copy to. "Select All" selects all days, "Clear All" deselects all days. Click "OK" to
copy the settings or "Cancel" to exit without copying.
Apply to Cameras: This button can be used to copy schedules to other cameras. Select which
cameras you wish to copy to. "Select All" selects all cameras, "Clear All" deselects all cameras.
Click "OK" to copy the settings or "Cancel" to exit without copying.
124

Advertisement

Table of Contents
loading

This manual is also suitable for:

Emv801Emv1601

Table of Contents