Technical Data; Fire Dimensions; Fitting The Reflective Panels - Baxi FURNESS Operating & Installation Manual

OPERATING INSTRUCTIONS

TECHNICAL DATA

Category I For use in GB and IE at a
2H
supply pressure of 20mbar
Furness
Natural Gas
Aeromatic
Main Burner
AC13/112511
(mod 263)
Injector
Bray 82-700
Max. Heat
Setting
Heat Input
(net)
Heat Ouput
(net)
Gas Rate
Cold Setting
Pressure
Min. Heat
Setting
Heat Input
(net)
Heat Ouput
(net)
Gas Rate
CLASS 4
NOx CLASS
6
Baxi Baxi
Burnmoor
Natural Gas
Aeromatic
AC13/112511
(mod 263)
Bray 82-700
3.3 kW 4.2 kW
2.2 kW 2.8 kW
0.349 0.444
m /hour m /hour
3 3
1.5mb
3.5mb
2.0 kW
2.6 kW
1.4 kW 1.8 kW
0.211 0.275
m /hour m /hour
3 3
CLASS 4

FIRE DIMENSIONS

FITTING THE REFLECTIVE
PANELS
Baxi Furness. The panels are already installed.
Baxi Burnmoor. The reflective panels supplied are
to be installed into the fire before the coal matrix is
fitted. The panels are hung on the lugs located inside
the top of the firebox on either side; the panel simply
hooks over the lug. The panels should be angled in
line with the bracket, so that the rear of the panels are
pointing towards the centre of the fire.
Once the reflective panels are fitted, arrange the
coals. See "Arranging the coals"
293mm
Fig. 2
Baxi Gas Stoves