Door Trim And Fire Glass Fitting & Removal - Baxi FURNESS Operating & Installation Manual

SERVICING
DOOR TRIM
The Baxi Gas range of stoves are fitted with a trim
to the fire door glass as standard. This, clips on to
the small lugs at the top and bottom of the aperture
in the cast iron fire door, as a "spring fit". When
fitted, the trim locks the glass retaining clips in
position. (Fig 10)
The fire door should be removed so that the above
operations can be carried out on a workbench or
similar. Remove the door by GENTLY tapping the
door upwards; this will lift off of its hinges.
Trim Fit. Fig 10
FIRE DOOR GLASS
If necessary the glass can be removed as follows
GLASS
Step 1 Remove the trim by pressing on the curved
GL ASS CLIP
edge at the top until the trim can be disengaged
GASK ET
from the lugs. FIRE DOOR
Step 2 Slide the two glass retainer clips on one side
only, inwards, towards the centre of the door as far
as they will go.
Step 3 Pull this side of the glass away from the door
casting, easing the tags on the glass retaining clips
past the edge of the aperture in the door casting.
Step 4 Remove the glass completely. Store glass
retaining clips and white gasket (if sound) safely
for re-use.
Step 5 Follow this procedure in reverse to fit
Glass Fit. Fig 11
replacement door glass or gasket.
18 Baxi Gas Stoves