Takagi T-KJr2U-IN Installation Manual And Owner's Manual page 27

• A remote controller is required for the Easy-Link system for ease of usage and
NOTICE
maintenance.
• If a remote controller is used, the temperature on all the units in the system
will automatically be set to the same temperature that is set on the remote.
(C) Examples of incorrect settings and /or connections
CASE 1: Wrong DIPswitch setting on the "PARENT" unit
• Unless you change DIPswitch No. 1
of the "PARENT" unit to the "ON"
position, the system will not work
as an Easy-Link system. The units
will operate as individual units.
CASE 2: Wrong connections between the "PARENT" unit and the
"CHILD-1" unit
• If you connect the "1" (or "2") connector of the "PARENT" unit to the "PARENT" (or "1")
connector of the "CHILD-1" unit, the system will not work as an Easy-link system. The units will
operate as individual units.
PARENT unit
Connectors
Lower bank of
DIPswitches
Communica on cable
Wrong Setting
CHILD-1 unit
Connectors
OR
Lower bank of
DIPswitches
Wrong
Connections
27
PARENT unit
Lower bank of
DIPswitches
Communica on cable
PARENT unit
Connectors
Lower bank of
DIPswitches
Communica on cable
Page
Installation Manual
Installation
CHILD-1 unit
Lower bank of
DIPswitches
CHILD-1 unit
Connectors
Lower bank of
DIPswitches
Wrong
Connections