Attaching/Removing The Base; Screen Position Adjustment - BenQ T71W ET-0004-L User Manual

ATTACHING / REMOVING THE BASE
Install:
Tighten the thumbscrew as indicated.

SCREEN POSITION ADJUSTMENT

In oder to optimize the best viewing position, you can adjust the tilt of the monitor by
using both of your hands to hold the edges of the monitor as shown in the figure below.
The monitor can be adjusted to 22 degrees up or 5 degrees down as indicated by arrow
below.
Remove:
Release the thumbscrew on the bottom
of the base as indicated.
5 22
0 0
E-3
T71W