How To Install On Windows Xp System - BenQ T71W ET-0004-L User Manual

How to install on Windows XP system

1. Open Display Properties.
The quickest shortcut to Display Properties is through the Windows desktop. Right-
click the desktop and select Properties from the popup menu.
Alternatively, the Windows menu to Display Properties is located in Control Panel.
In Windows XP version, Control Panel is located directly under the main Start
menu item.
The menu options displayed will depend upon which type of view is selected for
your system.
· Under the Classic view, click Start | Control Panel | Display.
· Under the Category view, click Start | Control Panel | Appearance and Themes |
Change the screen resolution.
The Display Properties window will display.
2. Click the Settings tab and the Advanced button.
The Advanced Display Properties window will display.
3. Click the Monitor tab and select the "Plug and Play Monitor" from the list.
If there is only one monitor in the list, it will already be selected for you.
4. Click the Properties button.
The Monitor Properties window will display.
If the driver provider is listed as BenQ, and the model matches that of your new
monitor, the proper drivers are already installed, and you need do nothing further.
Cancel out of these property windows.
However, if BenQ is not listed as the manufacturer, or the correct model is not
currently shown, you will need to continue with these instructions.
5. Click the Driver tab and the Update Driver button.
The Hardware Update Wizard will display. Follow the wizard instructions noting
the steps below:
6. Insert the BenQ LCD Monitor CD-ROM into a CD drive on the computer you
attached the monitor to.
7. Check the option "Install from a list or specific location" and click Next.
8. Check the option "Search for the best driver in these locations" and also check "
E-10
T71W