Power Saving; Ddc - BenQ T71W ET-0004-L User Manual

POWER SAVING

The monitor will be driven into
from the display controller, as indicated by the amber-color power LED.
The power saving states will be kept until a control signal has been detected or the keyboard
or mouse is activated. The recovery time from Active OFF state back to ON state is around
3 seconds.

DDC

To make your installation easier, the monitor is able to Plug and Play with your system if
your system also supports DDC protocol. The DDC (Display Data Channel) is a
communication protocol through which the monitor automatically informs the host system
about its capabilities, for example, supported resolutions and corresponding timing. The
monitor supports DDC2B standard.
" Power Saving " mode by the control signal
State
Consumption
ON Normal
Active
OFF
E-14
Power
LED Lig ht
< 2 W
Green
Amber
T71W