BenQ T71W ET-0004-L User Manual page 18

Standard OSD Operation
1. Press MENU key to activate the OSD menu, when OSD is not displayed.
2. Use Select key to move down through the menu cyclically. The parameter will be e
highlighted when selected.
3. Then use + or - to increase or decrease the value of the parameter, or make selection
between different options.
4. To quit the OSD screen at any time during the operation, press MENU key. If no keys
are pressed for a time period, the OSD automatically disappears.
5. When OSD is not displayed, press + key to start Auto-Adjust.
6. When OSD is not displayed, press - key to turn speaker ON/ OFF.
OSD Function Description
---------------------------------------------------------------------------------------
· Volume
---------------------------------------------------------------------------------------
· Brightness
· Contrast
---------------------------------------------------------------------------------------
· Color Temperature
---------------------------------------------------------------------------------------
· Horizontal Size
· Fine
· Left / Right
· Down / Up
· Auto Adjust
---------------------------------------------------------------------------------------
To increase or decrease the sound level.
To increase or decrease the brightness.
To increase or decrease the contrast.
Press - key or + key to select sRGB, Reddish, Bluish and
USER. Only when selecting USER, you can make
adjustments to the R/G/B content, otherwise not.
To increase or decrease the size of image.
To increase or decrease the snow noise of the image.
To move the screen toward left or right.
To move the screen upward or downward.
Press + key to turn on this function. The Auto-Adjust
will automatically adjust V-Position, H-Position, Clock,
and Clock-Phase, the whole process takes about 5
seconds.
E-16
T71W