How To Install The Monitor On A New Computer - BenQ T71W ET-0004-L User Manual

How to install the monitor on a new computer

This instruction details the procedure for selecting and installing the BenQ LCD
Monitor driver software on a new computer which has never had a monitor driver
installed before. This instruction is only suitable for a computer which has never been
used before, and for which the BenQ LCD Monitor is the first ever monitor to be
connected to it.
If you are adding the BenQ LCD Monitor to an existing computer that has already had
another monitor connected to it (and has monitor driver software installed), you should
not be following these instructions. You should instead be following the instructions for
How to upgrade the monitor on an existing computer.
1. Follow the instructions in How to assemble your monitor hardware on page 5.
When Windows (2000 or later) starts, it will automatically detect the new monitor
and launch the Found New Hardware Wizard. Follow the prompts until it displays
the option to Install Hardware Device drivers.
2. Insert the BenQ LCD Monitor CD-ROM into a CD drive on the computer.
3. Check Search for a suitable driver for my device option, and click Next.
4. Check the option for CD-ROM drives (uncheck all others) and click Next.
5. Look to confirm that the wizard has selected the correct name of your monitor as
" T71W" and click Next.
6. Click Finish.
7. Restart the computer.
E-8
T71W