Specifications; Hardware Features; Networking And Connectivity - Digital Equipment COLORWRITER LSR 2000 Service Manual

Appendix A:
Specifications
Specifications are subject to change with product
Note:
improvement.

Hardware features

The printer has the following hardware/software features:
• Video controller PCB with 32MB or 48MB of memory
(Compression technology allows most pages to print at 600 dpi)
• Electronics for Imaging, Inc. RipChips
• Supports AppleTalk, TCP/IP, and IPX protocols simultaneously
• Adobe PostScript Level 2013.114 CPSI
• Parallel (Centronics) port for direct connection printing
Video controller PCB controls ACK and BUSY signals. Uses
standard TTL logic on the interface with no termination.
• Hard disk drive, 514MB standard
• Control panel: 8 buttons, 6 LED's and a 2x16 LCD display
• Print Technology: 4 Color (CMYK) Monocomponent Toner
Laser Xerography
• Processor: 32-bit RISC processor (100 MHz Mips 4600)
• Resolution:
• 600x600 dots per inch - standard
• 200 lpi contone (1-4 useful bits per pixel)
• Monthly Usage: 2,500 pages/month
• Paper Types: cutsheet (U.S.A., European A4, B5 & legal),
transparencies and colored paper

Networking and connectivity

The printer has the following networking features:
• AUI connector for thin or thick Ethernet
• RJ-45 connector that supports twisted pair network
connectivity
• Novell network servers and other PC-based servers can be
connected to the printer via parallel port
• A CD-ROM drive can be connected to the printer via the video
controller's SCSI port
This document was created with FrameMaker 4 0 4
A-1