Hughes 9450 Series User Manual page 25

any TE that connects via DHCP to the UT (lower part of the
web page).
 There are also two ways to set the ACA whether you choose
Static or DHCP. You can choose whether the context should
be activated as soon as the UT detects the device ("ON"), or
if the context should only be activated when the TE attempts
to send data to the satellite link ("Data"):
o "Always ON": Select ON in the drop down menu
if you want the context to be On all the time.
o "Data": Select Data if you want the context to be
activated when the TE attempts to send data to the
satellite link
When using "Data" ACA, if the context is ever deactivated, it
will be reactivated when more data is sent.
As of release 5.7.1.2 and higher, the "On" option will now
always reactivate the context if it is deactivated, even if data is
not sent by the TE.
Static IP Automatic Contexts: You can configure your own
range of static IP addresses and QoS's to use with a static
automatic context.
To turn on a particular range of static addresses, select "On" or
"Data" from the drop down list and choose a range of addresses,
low and high to use (e.g. 192.168.128.200 to 192.168.128.202)
or you can leave the defaults (192.168.128.200 to
192.168.128.209).
Next select the desired QoS for that range of IP addresses (e.g.
Standard). The APN listed is the default APN read from the
SIM card (bgan.inmarsat.com). If your SIM is provisioned for
more than one APN, then you can select a secondary APN from
the drop down list.

Using the Web UI
3004128-0001 Revision C
17