Toyota Land Cruiser 2001 Owner's Manual page 269

WWW.MANUALS.WS
2. Pull the bulb out of the bulb base.
If the connector is tight, wiggle it.
WWW.MANUALS.WS
3. Install a new bulb base by turning it
clockwise to the front of the vehicle.
Aiming is not necessary after replacing
the bulb. When aiming adjustment is nec-
essary, contact your Toyota dealer.
'01 L/C U (L/O 0008)
—Front turn signal and front
side marker lights
Use a Phillips – head screwdriver.
269