Toyota Land Cruiser 2001 Owner's Manual page 146

WWW.MANUALS.WS
"AUTO" position
For automatic operation of the air condi-
tioning, turn the fan speed and air flow
selector knobs to the "AUTO" position.
In the automatic operation mode, the air
conditioning selects the most suitable fan
speed and air flow according to the tem-
perature.
You may use manual controls if you want
to select your own settings.
Fan speed selector
Turn the knob to adjust the fan speed—to
the right to increase, to the left to de-
crease.
In automatic operation, you do not have
to adjust the fan speed unless you desire
another fan speed mode.
Turning the fan speed selector knob to
"AUTO" position turns on the air condition-
ing. At this time, the "A/C" button indicator
comes on regardless of whether or not the
"A/C" button is pressed in.
Temperature selector
Turn the knob to adjust the temperature—
to the right to warm, to the left to cool.
In automatic operation, turn the knob to
the desired temperature.
146
WWW.MANUALS.WS
Air flow selector
Turn the knob to select the vents used for
air flow.
In automatic operation, you do not have
to select the air flow unless you desire
another air flow mode.
1. Panel—Air flows mainly from
instrument panel vents.
2. Bi–level—Air flows from both the floor
vents and the instrument panel vents.
3. Floor—Air flows mainly from the floor
vents.
It is recommended to close the lower
vent. For details about it, see "Instru-
ment panel vents" described below.
'01 L/C U (L/O 0008)
4. Floor/Windshield—Air flows
from the floor vents and windshield
vents.
It is recommended to close the lower
vent. For details about it, see "Instru-
ment panel vents" described below.
This position allows the air intake to
select "Fresh" automatically. This is to
clean up the front view more quickly.
Press the "A/C" button for dehumidified
heating or cooling. This setting clears
the front view more quickly.
5. Windshield—Air flows mainly from the
windshield vents.
It is recommended to close the lower
vent. For details about it, see "Instru-
ment panel vents" described below.
This position allows the air intake to
select "Fresh" automatically. This is to
clean up the front view more quickly.
the
Press the "A/C" button for dehumidified
heating or cooling. This setting clears
the front view more quickly.
For details about air flow selector settings,
see "Air flow selector settings" described
below.
mainly