Glove Box; Garage Door Opener - Toyota Land Cruiser 2001 Owner's Manual

WWW.MANUALS.WS

Glove box

To use the glove box, do this.
To open: Pull the lever.
With the instrument panel lights on, the
glove box light will come on when the
glove box is open.
To lock: Insert the master key and turn it
clockwise.
CAUTION
To reduce the chance of injury in
case of an accident or a sudden stop,
always keep the glove box
closed while driving.
WWW.MANUALS.WS

Garage door opener

Indicator light
Buttons
The garage door opener (HomeLink
Universal Transceiver) is manufactured un-
der license from HomeLink
programmed to operate
gates, entry doors, door locks, home light-
ing systems, and security systems, etc.
(a) Programming the HomeLink
R
The HomeLink in your vehicle has 3
buttons and you can store one program
for each button.
To ensure correct programming into the
R
HomeLink , install a new battery in the
hand–held transmitter prior to program-
door
ming.
'01 L/C U (L/O 0008)
The battery side of the hand–held trans-
mitter must be pointed away from the
R
HomeLink during the programming pro-
cess.
For Canadian users, follow the procedure
in "Programming an entrance gate/Pro-
gramming all devices in the Canadian
market".
1. Decide which of 3 HomeLink
you want to program.
2. Place your hand–held garage transmit-
ter 25 to 75 mm (1 to 3 in.) away from
the surface of the HomeLink
R
Keep the indicator
R
R
HomeLink in view while programming.
and can be
garage doors,
3. Simultaneously
hand–held garage
along with the selected HomeLink
R
ton.
4. When the indicator light on the Home-
R
Link changes from a slow to a rapid
flash after 20 seconds, you can release
both buttons.
5. Test the operation of the HomeLink
pressing the newly programmed button.
If programming a garage door opener,
check to see if the garage door opens
and closes.
R
buttons
R
.
light on the
press and hold the
transmitter button
R
but-
R
by
161