Toyota Land Cruiser 2001 Owner's Manual page 217

WWW.MANUALS.WS
When connecting a jack handle extension
with a jack handle end, use a Phillips–
head screwdriver or jack handle to tighten
the bolts on the joints as shown in the
illustration. When connecting the jack han-
dle with extension, tighten the wing bolt
on the joint securely. Make sure the hol-
low meets the bolt on every joint when
you tighten the bolts.
NOTICE
Tighten all the joints securely. Other-
wise, the extension may come off and
it may damage the paint or vehicle
body.
WWW.MANUALS.WS
2. Remove the access hole cover on the
rear bumper with a flat–bladed screw-
driver.
To protect the paint, place several sheets
of paper over the paintwork.
'01 L/C U (L/O 0008)
3. Insert the jack handle end into the low-
ering screw through the access hole
and turn it counterclockwise with push-
ing it to the front lightly.
217