Matrox Millenium II for Mac Installation Manual page 8

Note: When you change your monitor settings, your screen may flicker for a few seconds while
the settings are being changed. If you select a refresh rate that your monitor doesn't support, your
display may become garbled or unusable. If this happens, press [Enter] and your previous refresh
rate will be restored. If incorrect settings are applied, see
WARNING: If incorrect software monitor settings are used, some monitors can be permanently
damaged. For more information, see your monitor manual.
For a table of refresh rates supported by your Millennium II card,
Virtual Desktops
Click this box to select a desktop area that's larger than your on-screen work space (display area).
While you're using a virtual desktop and PanLOCK is off, move your mouse pointer to the edge of
your display to scroll in that direction.
Features
Acceleration –
specific problem is related to your Matrox card. If a problem persists after acceleration is turned
off, the problem is probably not related to your Matrox card.
PanLOCK – Use this feature to turn panning on or off when parts of your desktop area are
outside your view area (as with a virtual desktop or the PixelTOUCH zoom feature). When
panning is on, you can move your mouse cursor to the edge of your view area to pan in that
direction.
PixelTOUCH –
×2 or ×4 zoom factors. (The ×4 zoom factor is unavailable at display area resolutions 832 × 624
and lower.)
Hot Keys
Use this feature to assign keyboard shortcuts for
control panel.
Matrox PowerDesk
Information
Click this box to see information related to your graphics card and how to contact Matrox customer
support.
8 Matrox Millennium II for Mac – Installation Guide
Lets you turn Matrox acceleration on or off. This may help you find out if a
Use this feature to zoom in on your display. You can select the ×1 (actual size),
"Troubleshooting", page
see "Display information", page
and
PanLOCK PixelTOUCH
11.
9.
, and for opening the