Matrox Millenium II for Mac Installation Manual page 5

WARNING – Static electricity can severely damage electronic parts. Take these precautions:
Before touching any electronic parts, drain the static electricity from your body. You can do
this by touching the metal frame of your computer.
Don't remove a card from the anti-static container it was shipped in until you're ready to
install it. When you remove a card from your computer, place it back in its container.
When handling a card, hold it by its edges, and avoid touching its circuitry.
Insert your Millennium II card
Turn off your computer and all peripherals such as the monitor or printer. Open the computer
and remove the cover for the expansion slot you intend to use. Save the screw for the mounting
bracket. Position your Millennium II card over a PCI slot (your system manual should identify
the PCI slots in your computer). Push the card in firmly and evenly until it's fully seated in the
slot. Replace the screw to secure the bracket of your Millennium II card to the computer chassis.
Bracket screw
Millennium II card
PCI slot
Matrox Millennium II for Mac – Installation Guide
Motherboard
5