Auxiliary Port Controls; Disable Aulixiliary Port; Aux Port And Secondary Device Data Formats - Honeywell ms 7820 Solaris User Manual

S O
ECTION
AUX P
The following section includes features that are not available with all Metrologic
scanner models. Please contact a customer service representative for
additional information and technical assistance.
When using a Metrologic device as a secondary:
Follow Step 1 to configure the auxiliary port to accept a Metrologic scanner as the
secondary scanner. Then follow Step 2 to configure the secondary scanner to match
the auxiliary port's data format.
If the secondary scanner is not a Metrologic scanner go to page O-3 and follow the
instructions under "When using a non-Metrologic RS-232 Device as a secondary".
The auxiliary input port's data format must match the main output format of the
secondary scanner.
Step 1: Scan the following bar code to enable the auxiliary port on the primary scanner.
S
ORT AND ECONDARY
AUX Port Data Format
³ 4 3 7

Auxiliary Port Controls

D A
ISABLE
* Disable AUX Port
³ 4
D
EVICE
3 3 0
P
UXILIARY ORT
3 7 3 0 0
D F
ATA ORMATS
1
O