Configurable Code Lengths - Honeywell ms 7820 Solaris User Manual

Code Types & Decode Rules
S A
ECTION
There are seven bar code lock lengths available. Specific code types can be assigned to
a lock length using the Multi-Code configuration method.
Example:
1. Scan the enter/exit configuration bar code.
2. Scan the code length lock #1 bar code.
3. Scan the three Code Bytes that represent the code length.
4. Scan the matching code type lock #1 bar code.
5. Scan the three code bytes that represent the code type.
Refer to the Code Type Table in Section M.
6. Repeat steps 2 through 5 for lock lengths 2 through 7 if desired.
7. Scan the enter/exit configuration bar code when finished to save settings.
~ Code Length
Lock #1
³ 9 0 2 0 0
~ Code Length
Lock #2
³ 9 0 2 2 0
0
0
A 18
C
ONFIGURABLE
C L
ODE ENGTHS
~ Code Type
Lock #1
³ 9 0 2 1 0
~ Code Type
Lock #2
³ 9 0 2 3 0
0
0