Multitab Function; Select And Start A Washing Programme - Electrolux ESL 68060 User Manual

Multitab function

This appliance is equipped with the multitab
function, that allows the use of combi deter-
gent tablets.
These products are detergents with a com-
bined cleaning, rinsing and salt functions.
They can also contain other different agents
depending on which kind of tablets you
choose ("3 in 1", "4 in 1", "5 in 1" etc.).
Check whether these detergents are suitable
for your water hardness. See the manufac-
turers instructions.
Once this function is selected it will remain
active for all following wash programmes.
The multitab function stops automatically the
flow of rinse aid and salt. The salt and rinse
aid messages are deactivated.
The programme duration can increase if you
use the multitab function.
Activate or deactivate the multitab func-
tion before the start of a washing pro-
gramme. You cannot activate or deacti-
vate the multitab function when the pro-
gramme operates.

Select and start a washing programme

Important! Set the options before the start
of a washing programme. When a washing
programme operates, no options can be set.
If it is necessary to set an option, cancel the
washing programme.
1. Check that the baskets have been loaded
correctly and that the spray arms are free
to rotate.
2. Check that the water tap is opened.
Downloaded from DishWasher-Manual.com Manuals
3. Press the on/off button.
4. Close the lid and press until it locks in
place.
Detergent tablets from different manu-
facturers dissolve at different rates. For
this reason, some detergent tablets do
not attain their full cleaning power during
short washing programmes. Therefore,
please use long washing programmes
when using detergent tablets, to ensure
the complete removal of detergent re-
siduals.
If the drying results are not satisfactory
we suggest that you:
1. Fill up the rinse aid dispenser with
rinse aid.
2. Activate the rinse aid dispenser.
3. Set the rinse aid dosage to position
2.
If you decide to revert back to the use of
individual detergents we advise that you:
1. Deactivate the multitab function.
2. Fill up the dispensers for salt and
rinse aid again.
3. Adjust the water hardness setting to
the highest setting and perform 1
normal washing programme without
loading any dishes.
4. Adjust the water hardness setting
according to the hardness of the wa-
ter in your area.
5. Adjust the rinse aid dosage.
4. Select the washing programme. Refer to
'Washing programmes' chart for details.
5. If required, postpone the start time of the
washing programme.
6. Set, if required, the options.
7. Press the Ok/Start button and close the
door, the washing programme will start
automatically.
If the delay start has been set, the count-
down will start automatically. Once the
electrolux 15